Configuration

Once you've written the image file onto the SD card, there're a few steps you'll have to follow in order to configure your new Pwnagotchi properly.

Connect to your Pwnagotchi

First, start with connecting the USB cable to the data port of the Raspberry Pi and the RPi to your computer.
After a few seconds, the board will boot and you will see a new Ethernet interface on your host computer.
You'll need to configure it with a static IP address:
- IP: 10.0.0.1
- Netmask: 255.255.255.0
- Gateway: 10.0.0.1
- DNS (if required): 8.8.8.8 (or whatever)
If everything's been configured properly, you will now be able to ping both 10.0.0.2 or pwnagotchi.local
- If you have already customized the hostname of your Pwnagotchi, pwnagotchi.local won't work. Instead, try your unit's hostname + .local.
Congratulations! You can now connect to your unit using SSH:

ssh pi@10.0.0.2

About your SSH connection

The default password is raspberry; you should change it as soon as you log in for the first time by issuing the passwd command and selecting a new and more complex passphrase.

If you want to login directly without entering a password (recommended!), copy your SSH public key to the unit's authorized keys:

ssh-copy-id -i ~/.ssh/id_rsa.pub pi@10.0.0.2

Give your Pwnagotchi a name

You can now set a new name for your unit by changing the hostname!

Open the /etc/pwnagotchi/config.yml file (either via SSH or by directly editing the SD card contents from a computer) that will override the default configuration with your custom values.

Choose your Pwnagotchi's language

Pwnagotchi displays its UI in English by default, but it can speak several other languages! If you're fine with English, you don't need to do anything special.

But if you want, you can change main.lang to one of the supported languages:

English (default)
German
Dutch
Greek
Macedonian
Italian
French
Russian
Swedish

Display Selection

Set the type of display you want to use via ui.display.type. If your display does not work after changing this setting, you might need to completely remove power from the Raspberry Pi and make a clean boot.

You can configure the refresh interval of the display via ui.fps. We recommend using a slow refresh rate to avoid shortening the lifetime of your e-ink display. The default value is 0, which will only refresh when changes are made to the screen.

Want to be able to update your Pwnagotchi and access things from the internet on it? Sure you do!

Connect to the Pwnagotchi unit via usb0 (A.K.A., using the data port).
Run the appropriate connection sharing script to bring the interface up on your end and share internet connectivity from another interface:

OS	Script Location
Linux	`scripts/linux_connection_share.sh`
Mac OS X	`scripts/macos_connection_share.sh`
Windows	`scripts/win_connection_share.ps1`

Troubleshooting

If your network connection keeps flapping on your device connecting to your Pwnagotchi.

Check if usb0 (or equivalent) device is being controlled by NetworkManager.
You can check this via nmcli dev status.

3.5 KiB Raw Blame History