105 lines
4.4 KiB
Markdown
105 lines
4.4 KiB
Markdown
# Configuration
|
|
|
|
Once you've [written the image file onto the SD card](https://github.com/evilsocket/pwnagotchi/blob/master/docs/install.md#flashing-an-image), there're a few steps you'll have to follow in order to configure your new Pwnagotchi properly.
|
|
|
|
## Connect to your Pwnagotchi
|
|
|
|
1. First, start with connecting the USB cable to the data port of the Raspberry Pi and the RPi to your computer.
|
|
2. After a few seconds, the board will boot and you will see a new Ethernet interface on your host computer.
|
|
3. You'll need to configure it with a static IP address:
|
|
- IP: `10.0.0.1`
|
|
- Netmask: `255.255.255.0`
|
|
- Gateway: `10.0.0.1`
|
|
- DNS (if required): `8.8.8.8` (or whatever)
|
|
|
|
4. If everything's been configured properly, you will now be able to `ping` both `10.0.0.2` or `pwnagotchi.local`
|
|
* If you have already customized the hostname of your Pwnagotchi, `pwnagotchi.local` won't work. Instead, try *your unit's hostname* + `.local`.
|
|
|
|
5. **Congratulations!** You can now connect to your unit using SSH:
|
|
|
|
```bash
|
|
ssh pi@10.0.0.2
|
|
```
|
|
##### About your SSH connection
|
|
The default password is `raspberry`; you should change it as soon as you log in for the first time by issuing the `passwd` command and selecting a new and more complex passphrase.
|
|
|
|
If you want to login directly without entering a password (recommended!), copy your SSH public key to the unit's authorized keys:
|
|
|
|
```bash
|
|
ssh-copy-id -i ~/.ssh/id_rsa.pub pi@10.0.0.2
|
|
```
|
|
|
|
## Give your Pwnagotchi a name
|
|
|
|
You can now set a new name for your unit by [changing the hostname](https://geek-university.com/raspberry-pi/change-raspberry-pis-hostname/)!
|
|
|
|
Open the `/etc/pwnagotchi/config.yml` file (either via SSH or by directly editing the SD card contents from a computer) that will override the [default configuration](https://github.com/evilsocket/pwnagotchi/blob/master/pwnagotchi/defaults.yml) with your custom values.
|
|
|
|
## Choose your Pwnagotchi's language
|
|
|
|
Pwnagotchi displays its UI in English by default, but it can speak several other languages! If you're fine with English, you don't need to do anything special.
|
|
|
|
But if you want, you can change `main.lang` to one of the supported languages:
|
|
|
|
- **English** *(default)*
|
|
- German
|
|
- Dutch
|
|
- Greek
|
|
- Macedonian
|
|
- Italian
|
|
- French
|
|
- Russian
|
|
- Swedish
|
|
|
|
## PwnGRID
|
|
|
|
By default the `grid` [plugin](https://github.com/evilsocket/pwnagotchi/blob/master/docs/plugins.md) is enabled, this means that whenever the unit will detect internet connectivity in manual mode, it'll signal its
|
|
presence to the PwnGRID server and periodically send a list of the networks that it has pwned. None of the captured cryptographic material is sent to this server,
|
|
just the minimum information to enroll the unit in the database and know how many networks it "conquered" so far.
|
|
|
|
If you want to partially opt-out from this feature and have your unit only signal its presence without sending the list of networks, you can put this in your `/etc/pwnagotchi/config.yml` file:
|
|
|
|
```yaml
|
|
main:
|
|
plugins:
|
|
grid:
|
|
enabled: true
|
|
report: false # partial opt-out
|
|
```
|
|
|
|
If you prefer to completely opt-out and also disable signaling:
|
|
|
|
```yaml
|
|
main:
|
|
plugins:
|
|
grid:
|
|
enabled: false # full opt-out
|
|
report: false
|
|
```
|
|
|
|
## Display Selection
|
|
|
|
**Set the type of display you want to use via `ui.display.type`.**
|
|
If your display does not work after changing this setting, you might need to completely remove power from the Raspberry Pi and make a clean boot.
|
|
|
|
**You can configure the refresh interval of the display via `ui.fps`.** We recommend using a slow refresh rate to avoid shortening the lifetime of your e-ink display. The default value is `0`, which will *only* refresh when changes are made to the screen.
|
|
|
|
## Host Connection Share
|
|
|
|
Want to be able to update your Pwnagotchi and access things from the internet on it? *Sure you do!*
|
|
|
|
1. Connect to the Pwnagotchi unit via `usb0` (A.K.A., using the data port).
|
|
2. Run the appropriate connection sharing script to bring the interface up on your end and share internet connectivity from another interface:
|
|
|
|
OS | Script Location
|
|
------|---------------------------
|
|
Linux | `scripts/linux_connection_share.sh`
|
|
Mac OS X | `scripts/macos_connection_share.sh`
|
|
Windows | `scripts/win_connection_share.ps1`
|
|
|
|
## Troubleshooting
|
|
|
|
##### If your network connection keeps flapping on your device connecting to your Pwnagotchi.
|
|
* Check if `usb0` (or equivalent) device is being controlled by NetworkManager.
|
|
* You can check this via `nmcli dev status`.
|