Merge pull request #428 from ratmandu/waveshare-tricolor-fast
Adding Waveshare 2.13 tri-color display FAST MODE
This commit is contained in:
evilsocket
GitHub
commit
9c5006fefd
pwnagotchi
@ -207,6 +207,8 @@ ui:
|
||||
# Possible options inkyphat/inky, papirus/papi, waveshare_1/ws_1 or waveshare_2/ws_2, oledhat, lcdhat, waveshare27inch, dfrobot/df
|
||||
type: 'waveshare_2'
|
||||
# Possible options red/yellow/black (black used for monocromatic displays)
|
||||
# Waveshare tri-color 2.13in display can be over-driven with color set as 'fastAndFurious'
|
||||
# THIS IS POTENTIALLY DANGEROUS. DO NOT USE UNLESS YOU UNDERSTAND THAT IT COULD KILL YOUR DISPLAY
|
||||
color: 'black'
|
||||
video:
|
||||
enabled: true
|
||||
|
||||
359
pwnagotchi/ui/hw/libs/waveshare/v1/epd2in13bcFAST.py
Normal file
359
pwnagotchi/ui/hw/libs/waveshare/v1/epd2in13bcFAST.py
Normal file
@ -0,0 +1,359 @@
|
||||
# *****************************************************************************
|
||||
# * | File : epd2in13d.py
|
||||
# * | Author : Waveshare team
|
||||
# * | Function : Electronic paper driver
|
||||
# * | Info :
|
||||
# *----------------
|
||||
# * | This version: V4.0
|
||||
# * | Date : 2019-06-20
|
||||
# # | Info : python demo
|
||||
# -----------------------------------------------------------------------------
|
||||
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
# of this software and associated documnetation files (the "Software"), to deal
|
||||
# in the Software without restriction, including without limitation the rights
|
||||
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
# copies of the Software, and to permit persons to whom the Software is
|
||||
# furished to do so, subject to the following conditions:
|
||||
#
|
||||
# The above copyright notice and this permission notice shall be included in
|
||||
# all copies or substantial portions of the Software.
|
||||
#
|
||||
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
# THE SOFTWARE.
|
||||
#
|
||||
|
||||
|
||||
# =============================================================================
|
||||
# THIS FILE HAS BEEN MODIFIED FROM ORIGINAL, IT HAS BEEN MODIFIED TO RUN THE
|
||||
# THREE COLOR WAVESHARE 2.13IN DISPLAY AT A MUCH, MUCH FASTER RATE THAN NORMAL
|
||||
# AND IT COULD DAMAGE YOUR DISPLAY. THERE IS NO WARRANTY INCLUDED AND YOU USE
|
||||
# THIS CODE AT YOUR OWN RISK. WE ARE NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS
|
||||
# INCLUDING BUT NOT LIMITED TO: DESTRUCTION OF YOUR DISPLAY, PI, HOUSE, CAR,
|
||||
# SPACE-TIME-CONTINUUM, OR IF THE CODE KILLS YOUR CAT. IF YOU AREN'T WILLING TO
|
||||
# TAKE THESE RISKS, PLEASE DO NOT USE THIS CODE.
|
||||
# =============================================================================
|
||||
|
||||
|
||||
import logging
|
||||
from . import epdconfig
|
||||
from PIL import Image
|
||||
import RPi.GPIO as GPIO
|
||||
|
||||
# Display resolution
|
||||
EPD_WIDTH = 104
|
||||
EPD_HEIGHT = 212
|
||||
|
||||
class EPD:
|
||||
def __init__(self):
|
||||
self.reset_pin = epdconfig.RST_PIN
|
||||
self.dc_pin = epdconfig.DC_PIN
|
||||
self.busy_pin = epdconfig.BUSY_PIN
|
||||
self.cs_pin = epdconfig.CS_PIN
|
||||
self.width = EPD_WIDTH
|
||||
self.height = EPD_HEIGHT
|
||||
|
||||
lut_vcomDC = [
|
||||
0x00, 0x08, 0x00, 0x00, 0x00, 0x02,
|
||||
0x60, 0x28, 0x28, 0x00, 0x00, 0x01,
|
||||
0x00, 0x14, 0x00, 0x00, 0x00, 0x01,
|
||||
0x00, 0x12, 0x12, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_ww = [
|
||||
0x40, 0x08, 0x00, 0x00, 0x00, 0x02,
|
||||
0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
|
||||
0x40, 0x14, 0x00, 0x00, 0x00, 0x01,
|
||||
0xA0, 0x12, 0x12, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_bw = [
|
||||
0x40, 0x17, 0x00, 0x00, 0x00, 0x02,
|
||||
0x90, 0x0F, 0x0F, 0x00, 0x00, 0x03,
|
||||
0x40, 0x0A, 0x01, 0x00, 0x00, 0x01,
|
||||
0xA0, 0x0E, 0x0E, 0x00, 0x00, 0x02,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_wb = [
|
||||
0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
|
||||
0x90, 0x28, 0x28, 0x00, 0x00, 0x01,
|
||||
0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
|
||||
0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_bb = [
|
||||
0x80, 0x08, 0x00, 0x00, 0x00, 0x02,
|
||||
0x90, 0x28, 0x28, 0x00, 0x00, 0x00,
|
||||
0x80, 0x14, 0x00, 0x00, 0x00, 0x01,
|
||||
0x50, 0x12, 0x12, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_vcom1 = [
|
||||
0xA0, 0x10, 0x10, 0x00, 0x00, 0x02,
|
||||
0x00, 0x10, 0x10, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_ww1 = [
|
||||
0x50, 0x01, 0x01, 0x00, 0x00, 0x01,
|
||||
0xA0, 0x42, 0x42, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_bw1 = [
|
||||
0x50, 0x01, 0x01, 0x00, 0x00, 0x01,
|
||||
0xA0, 0x42, 0x42, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_wb1 = [
|
||||
0xA0, 0x01, 0x01, 0x00, 0x00, 0x01,
|
||||
0x50, 0x42, 0x42, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
lut_bb1 = [
|
||||
0xA0, 0x01, 0x01, 0x00, 0x00, 0x01,
|
||||
0x50, 0x42, 0x42, 0x00, 0x00, 0x01,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
]
|
||||
|
||||
|
||||
# Hardware reset
|
||||
def reset(self):
|
||||
epdconfig.digital_write(self.reset_pin, 1)
|
||||
epdconfig.delay_ms(200)
|
||||
epdconfig.digital_write(self.reset_pin, 0)
|
||||
epdconfig.delay_ms(10)
|
||||
epdconfig.digital_write(self.reset_pin, 1)
|
||||
epdconfig.delay_ms(200)
|
||||
|
||||
def send_command(self, command):
|
||||
epdconfig.digital_write(self.dc_pin, 0)
|
||||
epdconfig.digital_write(self.cs_pin, 0)
|
||||
epdconfig.spi_writebyte([command])
|
||||
epdconfig.digital_write(self.cs_pin, 1)
|
||||
|
||||
def send_data(self, data):
|
||||
epdconfig.digital_write(self.dc_pin, 1)
|
||||
epdconfig.digital_write(self.cs_pin, 0)
|
||||
epdconfig.spi_writebyte([data])
|
||||
epdconfig.digital_write(self.cs_pin, 1)
|
||||
|
||||
def ReadBusy(self):
|
||||
logging.debug("e-Paper busy")
|
||||
while(epdconfig.digital_read(self.busy_pin) == 0): # 0: idle, 1: busy
|
||||
self.send_command(0x71)
|
||||
epdconfig.delay_ms(100)
|
||||
logging.debug("e-Paper busy release")
|
||||
|
||||
def TurnOnDisplay(self):
|
||||
self.send_command(0x12)
|
||||
epdconfig.delay_ms(10)
|
||||
self.ReadBusy()
|
||||
|
||||
def init(self):
|
||||
if (epdconfig.module_init() != 0):
|
||||
return -1
|
||||
# EPD hardware init start
|
||||
self.reset()
|
||||
|
||||
self.send_command(0x01) # POWER SETTING
|
||||
self.send_data(0x03)
|
||||
self.send_data(0x00)
|
||||
self.send_data(0x2b)
|
||||
self.send_data(0x2b)
|
||||
self.send_data(0x03)
|
||||
|
||||
self.send_command(0x06) # boost soft start
|
||||
self.send_data(0x17) # A
|
||||
self.send_data(0x17) # B
|
||||
self.send_data(0x17) # C
|
||||
|
||||
self.send_command(0x04)
|
||||
self.ReadBusy()
|
||||
|
||||
self.send_command(0x00) # panel setting
|
||||
self.send_data(0xbf) # LUT from OTP,128x296
|
||||
self.send_data(0x0d) # VCOM to 0V fast
|
||||
|
||||
self.send_command(0x30) # PLL setting
|
||||
self.send_data(0x21) # 3a 100HZ 29 150Hz 39 200HZ 31 171HZ
|
||||
|
||||
self.send_command(0x61) # resolution setting
|
||||
self.send_data(self.width)
|
||||
self.send_data((self.height >> 8) & 0xff)
|
||||
self.send_data(self.height& 0xff)
|
||||
|
||||
self.send_command(0x82) # vcom_DC setting
|
||||
self.send_data(0x28)
|
||||
return 0
|
||||
|
||||
def SetFullReg(self):
|
||||
self.send_command(0x82)
|
||||
self.send_data(0x00)
|
||||
self.send_command(0X50)
|
||||
self.send_data(0x97)
|
||||
# self.send_command(0x00) # panel setting
|
||||
# self.send_data(0x9f) # LUT from OTP,128x296
|
||||
|
||||
def SetPartReg(self):
|
||||
# self.send_command(0x00) # panel setting
|
||||
# self.send_data(0xbf) # LUT from OTP,128x296
|
||||
self.send_command(0x82)
|
||||
self.send_data(0x03)
|
||||
self.send_command(0X50)
|
||||
self.send_data(0x47)
|
||||
|
||||
self.send_command(0x20) # vcom
|
||||
for count in range(0, 44):
|
||||
self.send_data(self.lut_vcom1[count])
|
||||
self.send_command(0x21) # ww --
|
||||
for count in range(0, 42):
|
||||
self.send_data(self.lut_ww1[count])
|
||||
self.send_command(0x22) # bw r
|
||||
for count in range(0, 42):
|
||||
self.send_data(self.lut_bw1[count])
|
||||
self.send_command(0x23) # wb w
|
||||
for count in range(0, 42):
|
||||
self.send_data(self.lut_wb1[count])
|
||||
self.send_command(0x24) # bb b
|
||||
for count in range(0, 42):
|
||||
self.send_data(self.lut_bb1[count])
|
||||
|
||||
def getbuffer(self, image):
|
||||
# logging.debug("bufsiz = ",int(self.width/8) * self.height)
|
||||
buf = [0xFF] * (int(self.width/8) * self.height)
|
||||
image_monocolor = image.convert('1')
|
||||
imwidth, imheight = image_monocolor.size
|
||||
pixels = image_monocolor.load()
|
||||
# logging.debug("imwidth = %d, imheight = %d",imwidth,imheight)
|
||||
if(imwidth == self.width and imheight == self.height):
|
||||
logging.debug("Vertical")
|
||||
for y in range(imheight):
|
||||
for x in range(imwidth):
|
||||
# Set the bits for the column of pixels at the current position.
|
||||
if pixels[x, y] == 0:
|
||||
buf[int((x + y * self.width) / 8)] &= ~(0x80 >> (x % 8))
|
||||
elif(imwidth == self.height and imheight == self.width):
|
||||
logging.debug("Horizontal")
|
||||
for y in range(imheight):
|
||||
for x in range(imwidth):
|
||||
newx = y
|
||||
newy = self.height - x - 1
|
||||
if pixels[x, y] == 0:
|
||||
buf[int((newx + newy*self.width) / 8)] &= ~(0x80 >> (y % 8))
|
||||
return buf
|
||||
|
||||
def display(self, image):
|
||||
if (Image == None):
|
||||
return
|
||||
|
||||
self.send_command(0x10)
|
||||
for i in range(0, int(self.width * self.height / 8)):
|
||||
self.send_data(0x00)
|
||||
epdconfig.delay_ms(10)
|
||||
|
||||
self.send_command(0x13)
|
||||
for i in range(0, int(self.width * self.height / 8)):
|
||||
self.send_data(image[i])
|
||||
epdconfig.delay_ms(10)
|
||||
|
||||
self.SetFullReg()
|
||||
self.TurnOnDisplay()
|
||||
|
||||
def DisplayPartial(self, image):
|
||||
if (Image == None):
|
||||
return
|
||||
|
||||
self.SetPartReg()
|
||||
self.send_command(0x91)
|
||||
self.send_command(0x90)
|
||||
self.send_data(0)
|
||||
self.send_data(self.width - 1)
|
||||
|
||||
self.send_data(0)
|
||||
self.send_data(0)
|
||||
self.send_data(int(self.height / 256))
|
||||
self.send_data(self.height % 256 - 1)
|
||||
self.send_data(0x28)
|
||||
|
||||
self.send_command(0x10)
|
||||
for i in range(0, int(self.width * self.height / 8)):
|
||||
self.send_data(image[i])
|
||||
epdconfig.delay_ms(10)
|
||||
|
||||
self.send_command(0x13)
|
||||
for i in range(0, int(self.width * self.height / 8)):
|
||||
self.send_data(~image[i])
|
||||
epdconfig.delay_ms(10)
|
||||
|
||||
self.TurnOnDisplay()
|
||||
|
||||
def Clear(self):
|
||||
self.send_command(0x10)
|
||||
for i in range(0, int(self.width * self.height / 8)):
|
||||
self.send_data(0x00)
|
||||
epdconfig.delay_ms(10)
|
||||
|
||||
self.send_command(0x13)
|
||||
for i in range(0, int(self.width * self.height / 8)):
|
||||
self.send_data(0x00)
|
||||
epdconfig.delay_ms(10)
|
||||
|
||||
self.SetFullReg()
|
||||
self.TurnOnDisplay()
|
||||
|
||||
def sleep(self):
|
||||
self.send_command(0X50)
|
||||
self.send_data(0xf7)
|
||||
self.send_command(0X02) # power off
|
||||
self.send_command(0X07) # deep sleep
|
||||
self.send_data(0xA5)
|
||||
|
||||
epdconfig.module_exit()
|
||||
|
||||
### END OF FILE ###
|
||||
@ -60,7 +60,14 @@ class WaveshareV1(DisplayImpl):
|
||||
self._display.init(self._display.lut_full_update)
|
||||
self._display.Clear(0xFF)
|
||||
self._display.init(self._display.lut_partial_update)
|
||||
|
||||
elif self.config['color'] == 'fastAndFurious':
|
||||
logging.info("initializing waveshare v1 3-color display in FAST MODE")
|
||||
logging.info("THIS MAY BE POTENTIALLY DANGEROUS. NO WARRANTY IS PROVIDED")
|
||||
logging.info("USE THIS DISPLAY IN THIS MODE AT YOUR OWN RISK")
|
||||
from pwnagotchi.ui.hw.libs.waveshare.v1.epd2in13bcFAST import EPD
|
||||
self._display = EPD()
|
||||
self._display.init()
|
||||
self._display.Clear()
|
||||
else:
|
||||
logging.info("initializing waveshare v1 display 3-color mode")
|
||||
from pwnagotchi.ui.hw.libs.waveshare.v1.epd2in13bc import EPD
|
||||
@ -72,13 +79,11 @@ class WaveshareV1(DisplayImpl):
|
||||
if self.config['color'] == 'black':
|
||||
buf = self._display.getbuffer(canvas)
|
||||
self._display.display(buf)
|
||||
elif self.config['color'] == 'fastAndFurious':
|
||||
buf_black = self._display.getbuffer(canvas)
|
||||
self._display.DisplayPartial(buf_black)
|
||||
else:
|
||||
buf_black = self._display.getbuffer(canvas)
|
||||
# emptyImage = Image.new('1', (self._display.height, self._display.width), 255)
|
||||
# buf_color = self._display.getbuffer(emptyImage)
|
||||
# self._display.display(buf_black,buf_color)
|
||||
# Custom display function that only handles black
|
||||
# Was included in epd2in13bc.py
|
||||
self._display.displayBlack(buf_black)
|
||||
|
||||
def clear(self):
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user