Adding support for Waveshare LCD Hat (ST7789 chip)

pwnagotchi/ui/hw/libs/waveshare/lcdhat/ST7789.py

@@ -0,0 +1,165 @@
+import spidev
+import RPi.GPIO as GPIO
+import time
+import numpy as np
+
+
+class ST7789(object):
+    """class for ST7789  240*240 1.3inch OLED displays."""
+
+    def __init__(self,spi,rst = 27,dc = 25,bl = 24):
+        self.width = 240
+        self.height = 240
+        #Initialize DC RST pin
+        self._dc = dc
+        self._rst = rst
+        self._bl = bl
+        GPIO.setmode(GPIO.BCM)
+        GPIO.setwarnings(False)
+        GPIO.setup(self._dc,GPIO.OUT)
+        GPIO.setup(self._rst,GPIO.OUT)
+        GPIO.setup(self._bl,GPIO.OUT)
+        GPIO.output(self._bl, GPIO.HIGH)
+        #Initialize SPI
+        self._spi = spi
+        self._spi.max_speed_hz = 40000000
+
+    """    Write register address and data     """
+    def command(self, cmd):
+        GPIO.output(self._dc, GPIO.LOW)
+        self._spi.writebytes([cmd])
+
+    def data(self, val):
+        GPIO.output(self._dc, GPIO.HIGH)
+        self._spi.writebytes([val])
+
+    def Init(self):
+        """Initialize dispaly"""    
+        self.reset()
+
+        self.command(0x36)
+        self.data(0x70)                 #self.data(0x00)
+
+        self.command(0x3A) 
+        self.data(0x05)
+
+        self.command(0xB2)
+        self.data(0x0C)
+        self.data(0x0C)
+        self.data(0x00)
+        self.data(0x33)
+        self.data(0x33)
+
+        self.command(0xB7)
+        self.data(0x35) 
+
+        self.command(0xBB)
+        self.data(0x19)
+
+        self.command(0xC0)
+        self.data(0x2C)
+
+        self.command(0xC2)
+        self.data(0x01)
+
+        self.command(0xC3)
+        self.data(0x12)   
+
+        self.command(0xC4)
+        self.data(0x20)
+
+        self.command(0xC6)
+        self.data(0x0F) 
+
+        self.command(0xD0)
+        self.data(0xA4)
+        self.data(0xA1)
+
+        self.command(0xE0)
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0D)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2B)
+        self.data(0x3F)
+        self.data(0x54)
+        self.data(0x4C)
+        self.data(0x18)
+        self.data(0x0D)
+        self.data(0x0B)
+        self.data(0x1F)
+        self.data(0x23)
+
+        self.command(0xE1)
+        self.data(0xD0)
+        self.data(0x04)
+        self.data(0x0C)
+        self.data(0x11)
+        self.data(0x13)
+        self.data(0x2C)
+        self.data(0x3F)
+        self.data(0x44)
+        self.data(0x51)
+        self.data(0x2F)
+        self.data(0x1F)
+        self.data(0x1F)
+        self.data(0x20)
+        self.data(0x23)
+        
+        self.command(0x21)
+
+        self.command(0x11)
+
+        self.command(0x29)
+
+    def reset(self):
+        """Reset the display"""
+        GPIO.output(self._rst,GPIO.HIGH)
+        time.sleep(0.01)
+        GPIO.output(self._rst,GPIO.LOW)
+        time.sleep(0.01)
+        GPIO.output(self._rst,GPIO.HIGH)
+        time.sleep(0.01)
+        
+    def SetWindows(self, Xstart, Ystart, Xend, Yend):
+        #set the X coordinates
+        self.command(0x2A)
+        self.data(0x00)               #Set the horizontal starting point to the high octet
+        self.data(Xstart & 0xff)      #Set the horizontal starting point to the low octet
+        self.data(0x00)               #Set the horizontal end to the high octet
+        self.data((Xend - 1) & 0xff) #Set the horizontal end to the low octet 
+        
+        #set the Y coordinates
+        self.command(0x2B)
+        self.data(0x00)
+        self.data((Ystart & 0xff))
+        self.data(0x00)
+        self.data((Yend - 1) & 0xff )
+
+        self.command(0x2C)    
+    
+    def ShowImage(self,Image,Xstart,Ystart):
+        """Set buffer to value of Python Imaging Library image."""
+        """Write display buffer to physical display"""
+        imwidth, imheight = Image.size
+        if imwidth != self.width or imheight != self.height:
+            raise ValueError('Image must be same dimensions as display \
+                ({0}x{1}).' .format(self.width, self.height))
+        img = np.asarray(Image)
+        pix = np.zeros((self.width,self.height,2), dtype = np.uint8)
+        pix[...,[0]] = np.add(np.bitwise_and(img[...,[0]],0xF8),np.right_shift(img[...,[1]],5))
+        pix[...,[1]] = np.add(np.bitwise_and(np.left_shift(img[...,[1]],3),0xE0),np.right_shift(img[...,[2]],3))
+        pix = pix.flatten().tolist()
+        self.SetWindows ( 0, 0, self.width, self.height)
+        GPIO.output(self._dc,GPIO.HIGH)
+        for i in range(0,len(pix),4096):
+            self._spi.writebytes(pix[i:i+4096])		
+        
+    def clear(self):
+        """Clear contents of image buffer"""
+        _buffer = [0xff]*(self.width * self.height * 2)
+        self.SetWindows ( 0, 0, self.width, self.height)
+        GPIO.output(self._dc,GPIO.HIGH)
+        for i in range(0,len(_buffer),4096):
+            self._spi.writebytes(_buffer[i:i+4096])		

pwnagotchi/ui/hw/libs/waveshare/lcdhat/config.py

@@ -0,0 +1,76 @@
+# /*****************************************************************************
+# * | File        :   config.py
+# * | Author      :   Guillaume Giraudon
+# * | Info        :
+# *----------------
+# * | This version:   V1.0
+# * | Date        :   2019-10-18
+# * | Info        :
+# ******************************************************************************/
+
+import RPi.GPIO as GPIO
+import time
+from smbus import SMBus
+import spidev
+
+import ctypes
+# import spidev
+
+# Pin definition
+RST_PIN         = 27
+DC_PIN          = 25
+BL_PIN          = 24
+
+Device_SPI = 1
+Device_I2C = 0
+
+Device = Device_SPI
+spi = spidev.SpiDev(0, 0)
+
+def digital_write(pin, value):
+    GPIO.output(pin, value)
+
+def digital_read(pin):
+    return GPIO.input(BUSY_PIN)
+
+def delay_ms(delaytime):
+    time.sleep(delaytime / 1000.0)
+
+def spi_writebyte(data):
+    # SPI.writebytes(data)
+    spi.writebytes([data[0]])
+
+def i2c_writebyte(reg, value):
+    bus.write_byte_data(address, reg, value)
+
+    # time.sleep(0.01)
+def module_init():
+    # print("module_init")
+
+    GPIO.setmode(GPIO.BCM)
+    GPIO.setwarnings(False)
+    GPIO.setup(RST_PIN, GPIO.OUT)
+    GPIO.setup(DC_PIN, GPIO.OUT)
+
+
+    # SPI.max_speed_hz = 2000000
+    # SPI.mode = 0b00
+    # i2c_writebyte(0xff,0xff)
+    # spi.SYSFS_software_spi_begin()
+    # spi.SYSFS_software_spi_setDataMode(0);
+    # spi.SYSFS_software_spi_setClockDivider(1);
+    #spi.max_speed_hz = 2000000
+    #spi.mode = 0b00
+
+    GPIO.output(BL_PIN, 1)
+    GPIO.output(DC_PIN, 0)
+    return 0
+
+def module_exit():
+    spi.SYSFS_software_spi_end()
+    GPIO.output(RST_PIN, 0)
+    GPIO.output(DC_PIN, 0)
+
+
+
+### END OF FILE ###

pwnagotchi/ui/hw/libs/waveshare/lcdhat/epd.py

@@ -0,0 +1,28 @@
+from . import ST7789
+from . import config
+
+# Display resolution
+EPD_WIDTH       = 240
+EPD_HEIGHT      = 240
+
+disp = ST7789.ST7789(config.spi,config.RST_PIN, config.DC_PIN, config.BL_PIN)
+
+class EPD(object):
+
+    def __init__(self):
+        self.reset_pin = config.RST_PIN
+        self.dc_pin = config.DC_PIN
+        #self.busy_pin = config.BUSY_PIN
+        #self.cs_pin = config.CS_PIN
+        self.width = EPD_WIDTH
+        self.height = EPD_HEIGHT
+
+    def init(self):
+        disp.Init()
+
+    def Clear(self):
+        disp.clear()
+
+    def display(self, image):
+        rgb_im = image.convert('RGB')
+        disp.ShowImage(rgb_im,0,0)