removed unused files
This commit is contained in:
Simone Margaritelli
parent
6b31726ca1
commit
01271acb92
@ -1 +0,0 @@
|
|||||||
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_ether
|
|
||||||
File diff suppressed because it is too large
Load Diff
@ -1 +0,0 @@
|
|||||||
alpha
|
|
||||||
@ -1,6 +0,0 @@
|
|||||||
127.0.0.1 localhost alpha alpha.local
|
|
||||||
::1 localhost ip6-localhost ip6-loopback
|
|
||||||
fe00::0 ip6-localnet
|
|
||||||
ff00::0 ip6-mcastprefix
|
|
||||||
ff02::1 ip6-allnodes
|
|
||||||
ff02::2 ip6-allrouters
|
|
||||||
@ -1 +0,0 @@
|
|||||||
(◕‿‿◕) alpha (pwnagotchi)
|
|
||||||
@ -1,17 +0,0 @@
|
|||||||
auto lo
|
|
||||||
|
|
||||||
iface lo inet loopback
|
|
||||||
|
|
||||||
allow-hotplug wlan0
|
|
||||||
iface wlan0 inet static
|
|
||||||
|
|
||||||
allow-hotplug eth0
|
|
||||||
iface eth0 inet dhcp
|
|
||||||
|
|
||||||
allow-hotplug usb0
|
|
||||||
iface usb0 inet static
|
|
||||||
address 10.0.0.2
|
|
||||||
netmask 255.255.255.0
|
|
||||||
network 10.0.0.0
|
|
||||||
broadcast 10.0.0.255
|
|
||||||
gateway 10.0.0.1
|
|
||||||
@ -1,19 +0,0 @@
|
|||||||
#!/bin/sh -e
|
|
||||||
#
|
|
||||||
# rc.local
|
|
||||||
#
|
|
||||||
# This script is executed at the end of each multiuser runlevel.
|
|
||||||
# Make sure that the script will "exit 0" on success or any other
|
|
||||||
# value on error.
|
|
||||||
#
|
|
||||||
# In order to enable or disable this script just change the execution
|
|
||||||
# bits.
|
|
||||||
#
|
|
||||||
# By default this script does nothing.
|
|
||||||
# Powersave (Disable HDMI) ~30ma
|
|
||||||
sleep 10
|
|
||||||
if ! /opt/vc/bin/tvservice -s | grep HDMI; then
|
|
||||||
/opt/vc/bin/tvservice -o
|
|
||||||
fi
|
|
||||||
/root/pwnagotchi/scripts/startup.sh &
|
|
||||||
exit 0
|
|
||||||
@ -1,121 +0,0 @@
|
|||||||
# $OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
|
|
||||||
|
|
||||||
# This is the sshd server system-wide configuration file. See
|
|
||||||
# sshd_config(5) for more information.
|
|
||||||
|
|
||||||
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
|
|
||||||
|
|
||||||
# The strategy used for options in the default sshd_config shipped with
|
|
||||||
# OpenSSH is to specify options with their default value where
|
|
||||||
# possible, but leave them commented. Uncommented options override the
|
|
||||||
# default value.
|
|
||||||
|
|
||||||
#Port 22
|
|
||||||
#AddressFamily any
|
|
||||||
#ListenAddress 0.0.0.0
|
|
||||||
#ListenAddress ::
|
|
||||||
|
|
||||||
#HostKey /etc/ssh/ssh_host_rsa_key
|
|
||||||
#HostKey /etc/ssh/ssh_host_ecdsa_key
|
|
||||||
#HostKey /etc/ssh/ssh_host_ed25519_key
|
|
||||||
|
|
||||||
# Ciphers and keying
|
|
||||||
#RekeyLimit default none
|
|
||||||
|
|
||||||
# Logging
|
|
||||||
#SyslogFacility AUTH
|
|
||||||
#LogLevel INFO
|
|
||||||
|
|
||||||
# Authentication:
|
|
||||||
|
|
||||||
#LoginGraceTime 2m
|
|
||||||
PermitRootLogin yes
|
|
||||||
#StrictModes yes
|
|
||||||
#MaxAuthTries 6
|
|
||||||
#MaxSessions 10
|
|
||||||
|
|
||||||
#PubkeyAuthentication yes
|
|
||||||
|
|
||||||
# Expect .ssh/authorized_keys2 to be disregarded by default in future.
|
|
||||||
#AuthorizedKeysFile .ssh/authorized_keys .ssh/authorized_keys2
|
|
||||||
|
|
||||||
#AuthorizedPrincipalsFile none
|
|
||||||
|
|
||||||
#AuthorizedKeysCommand none
|
|
||||||
#AuthorizedKeysCommandUser nobody
|
|
||||||
|
|
||||||
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
|
|
||||||
#HostbasedAuthentication no
|
|
||||||
# Change to yes if you don't trust ~/.ssh/known_hosts for
|
|
||||||
# HostbasedAuthentication
|
|
||||||
#IgnoreUserKnownHosts no
|
|
||||||
# Don't read the user's ~/.rhosts and ~/.shosts files
|
|
||||||
#IgnoreRhosts yes
|
|
||||||
|
|
||||||
# To disable tunneled clear text passwords, change to no here!
|
|
||||||
#PasswordAuthentication yes
|
|
||||||
#PermitEmptyPasswords no
|
|
||||||
|
|
||||||
# Change to yes to enable challenge-response passwords (beware issues with
|
|
||||||
# some PAM modules and threads)
|
|
||||||
ChallengeResponseAuthentication no
|
|
||||||
|
|
||||||
# Kerberos options
|
|
||||||
#KerberosAuthentication no
|
|
||||||
#KerberosOrLocalPasswd yes
|
|
||||||
#KerberosTicketCleanup yes
|
|
||||||
#KerberosGetAFSToken no
|
|
||||||
|
|
||||||
# GSSAPI options
|
|
||||||
#GSSAPIAuthentication no
|
|
||||||
#GSSAPICleanupCredentials yes
|
|
||||||
#GSSAPIStrictAcceptorCheck yes
|
|
||||||
#GSSAPIKeyExchange no
|
|
||||||
|
|
||||||
# Set this to 'yes' to enable PAM authentication, account processing,
|
|
||||||
# and session processing. If this is enabled, PAM authentication will
|
|
||||||
# be allowed through the ChallengeResponseAuthentication and
|
|
||||||
# PasswordAuthentication. Depending on your PAM configuration,
|
|
||||||
# PAM authentication via ChallengeResponseAuthentication may bypass
|
|
||||||
# the setting of "PermitRootLogin without-password".
|
|
||||||
# If you just want the PAM account and session checks to run without
|
|
||||||
# PAM authentication, then enable this but set PasswordAuthentication
|
|
||||||
# and ChallengeResponseAuthentication to 'no'.
|
|
||||||
UsePAM yes
|
|
||||||
|
|
||||||
#AllowAgentForwarding yes
|
|
||||||
#AllowTcpForwarding yes
|
|
||||||
#GatewayPorts no
|
|
||||||
X11Forwarding yes
|
|
||||||
#X11DisplayOffset 10
|
|
||||||
#X11UseLocalhost yes
|
|
||||||
#PermitTTY yes
|
|
||||||
PrintMotd no
|
|
||||||
#PrintLastLog yes
|
|
||||||
#TCPKeepAlive yes
|
|
||||||
#PermitUserEnvironment no
|
|
||||||
#Compression delayed
|
|
||||||
#ClientAliveInterval 0
|
|
||||||
#ClientAliveCountMax 3
|
|
||||||
#UseDNS no
|
|
||||||
#PidFile /var/run/sshd.pid
|
|
||||||
#MaxStartups 10:30:100
|
|
||||||
#PermitTunnel no
|
|
||||||
#ChrootDirectory none
|
|
||||||
#VersionAddendum none
|
|
||||||
|
|
||||||
# no default banner path
|
|
||||||
#Banner none
|
|
||||||
|
|
||||||
# Allow client to pass locale environment variables
|
|
||||||
AcceptEnv LANG LC_*
|
|
||||||
|
|
||||||
# override default of no subsystems
|
|
||||||
Subsystem sftp /usr/lib/openssh/sftp-server
|
|
||||||
|
|
||||||
# Example of overriding settings on a per-user basis
|
|
||||||
#Match User anoncvs
|
|
||||||
# X11Forwarding no
|
|
||||||
# AllowTcpForwarding no
|
|
||||||
# PermitTTY no
|
|
||||||
# ForceCommand cvs server
|
|
||||||
Binary file not shown.
|
Before Width: | Height: | Size: 11 KiB |
@ -1,51 +0,0 @@
|
|||||||
#!/usr/bin/gawk -f
|
|
||||||
#-------------------------------------------------------------------------------
|
|
||||||
# ~/bin/cpustat : display cpu utilization
|
|
||||||
#
|
|
||||||
# usage : normally used as a GNU/screen backtick
|
|
||||||
#
|
|
||||||
# notes : 1. Works on the assumption that /proc/stat's first line
|
|
||||||
# : has the total "jiffies" since boot up used by the
|
|
||||||
# : different types of tasks in the system. See the
|
|
||||||
# : filesystems/proc.txt document in kernel source tree
|
|
||||||
# :
|
|
||||||
# : 2. Displays a total CPU% (user+system+nice) as well as
|
|
||||||
# : user CPU% system CPU% and nice CPU%
|
|
||||||
#-------------------------------------------------------------------------------
|
|
||||||
BEGIN {
|
|
||||||
file = "/proc/stat"
|
|
||||||
while (getline < file) { # read first line
|
|
||||||
# extract jiffies:
|
|
||||||
user=$2-user_saved; # . user
|
|
||||||
nice=$3-nice_saved; # . nice user
|
|
||||||
syst=$4-syst_saved; # . system
|
|
||||||
idle=$5-idle_saved; # . idle
|
|
||||||
wait=$6-wait_saved; # . iowait
|
|
||||||
irqs=$7-irqs_saved; # . irq
|
|
||||||
sirq=$8-sirq_saved; # . softirq
|
|
||||||
|
|
||||||
cact=user+syst+nice; # what counts
|
|
||||||
ctot=user+nice+syst+idle+wait+irqs+sirq; # total activity
|
|
||||||
|
|
||||||
tcpu=cact/ctot*100; # total % cpu utilization
|
|
||||||
ucpu=user/ctot*100; # user % cpu utilization
|
|
||||||
scpu=syst/ctot*100; # system % cpu utilization
|
|
||||||
ncpu=nice/ctot*100; # nice % cpu utilization
|
|
||||||
|
|
||||||
printf "%.1f %%\n",tcpu
|
|
||||||
|
|
||||||
|
|
||||||
user_saved=$2; # save the current jiffies
|
|
||||||
nice_saved=$3; # values for the next loop
|
|
||||||
syst_saved=$4;
|
|
||||||
idle_saved=$5;
|
|
||||||
wait_saved=$6;
|
|
||||||
irqs_saved=$7;
|
|
||||||
sirq_saved=$8;
|
|
||||||
|
|
||||||
close(file) # re-read file
|
|
||||||
|
|
||||||
system("sleep 3")
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
@ -1 +0,0 @@
|
|||||||
free -m | grep Mem | awk {'printf( "%.1f %", $3 / $2 * 100 )'}
|
|
||||||
@ -1,2 +0,0 @@
|
|||||||
#!/bin/bash
|
|
||||||
iw phy phy0 interface add mon0 type monitor && ifconfig mon0 up
|
|
||||||
@ -1,2 +0,0 @@
|
|||||||
#!/bin/bash
|
|
||||||
ifconfig mon0 down && iw dev mon0 del
|
|
||||||
Loading…
x
Reference in New Issue
Block a user